View The Satellite Status In The Satellite Web Interface - NETGEAR MR90 User Manual

• Connected Mesh Device: The router or (other) satellite that the satellite is
connected to. The Orbi router's or satellite's MAC address also displays.
• Backhaul Status: The quality of the backhaul status between the satellite and
the router or (other) satellite.
The Connected Devices table displays the following information:
• Status: Displays only if network access control (see Network access control list
on page 44) is enabled. The field displays if a device is allowed or blocked.
• Connection Type: The device is connected to the mesh network through a WiFi
or wired Ethernet connection.
• Device Name: The device model, device name, and IP address.
• IP Address: The device IP address. This IP address can change because the
router assigns an IP address to each device when it joins the network.
• MAC Address: The device MAC address. The unique MAC address for each
device does not change.
View the satellite status in the satellite web
interface
The satellite web interface lets you view satellite status information that you cannot view
from the router web interface. You can find the IP address of the satellite in the router
web interface. You can then launch a new web browser window, enter the satellite IP
address, and access the satellite web interface.
To view your satellite's status, it must be connected to your mesh network.
To view your satellite's status:
1. Launch a web browser from a computer or mobile device that is connected to your
mesh network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
Manage your Router and
Satellite
Nighthawk Tri-band Mesh WiFi 6E
115 User Manual