Change The Region Of Operation - NETGEAR MR90 User Manual

5. Select or clear the Enable AX check box.
Selecting this check box turns on AX WiFi and clearing this check box turns off AX
WiFi.
6. Click the Apply button.
Your settings are saved.

Change the region of operation

You can change the region of operation, which is region in which you operate the router.
For some countries or regions, such as North America, you cannot change the region
because it is preset.
NOTE: Make sure the country is set to the location where the device is
operating. You are responsible for complying within the local, regional, and
national regulations set for channels, power levels, and frequency ranges.
WARNING: It might not be legal to operate the router in a region other than
the regions listed in the menu. If your country or region is not listed, check with
your local government agency.
To change the region of operation:
1. Launch a web browser from a computer or mobile device that is connected to your
mesh network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Wireless Settings.
The Advanced Wireless Settings page displays.
5. From the Region menu, select the region in which the router must operate.
Manage WiFi Settings
Nighthawk Tri-band Mesh WiFi 6E
75 User Manual