Enable Port Triggering - NETGEAR MR90 User Manual

The page adjusts.
6. Click the Add Service button.
The Port Triggering - Services page displays.
7. In the Service Name field, type a descriptive service name.
8. From the Service User menu, select a user option:
• Any: This is the default setting and allows any computer on the Internet to use
this service.
• Single address: Restricts the service to a particular computer. Enter the IP address
in the fields, which become available with this selection from the menu.
9. From the Service Type menu, select the protocol (TCP or UDP) that is associated
with the service or application.
10. In the Triggering Port field, enter the number of the outbound traffic port that must
open the inbound ports.
11. From the Connection Type menu, select the protocol (TCP or UDP) that is associated
with the inbound connection.
If you are unsure, select TCP/UDP.
12. In the Starting Port and Ending Port fields, enter the enter the numbers of the
inbound traffic ports.
13. Click the Apply button.
The service is now in the Portmap Table. You must enable port triggering before
the router uses port triggering. See Enable port triggering on page 145.

Enable port triggering

To enable port triggering:
1. Launch a web browser from a computer or mobile device that is connected to your
mesh network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
Manage Port Forwarding and
Port Triggering
Nighthawk Tri-band Mesh WiFi 6E
145 User Manual