Always Use Https To Access The Router - NETGEAR MR90 User Manual

Always use HTTPS to access the router

You can configure the router to require HTTPS connections between your web browser
and the router web interface, for example, "https://www.routerlogin.net". When you
enable the HTTPS requirement, connection requests to the router web interface that
specify HTTP are automatically converted to HTTPS.
NOTE: After you enable the HTTPS requirement, when you enter
http://www.routerlogin.net, your browser might display a security warning
because of the self-signed certificate on the router. This is expected behavior.
You can proceed, or add an exception for the security warning. For more
information, visit
https://kb.netgear.com/000062980/what-to-do-incase-of-security-message.
To require HTTPS connections:
1. Launch a web browser from a computer or mobile device that is connected to your
mesh network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Web Services Management.
The Web Services Management page displays.
5. Select the Always Use HTTPS to Access Router check box.
6. Click the Apply button.
Your settings are saved.
Manage your Router and
Satellite
Nighthawk Tri-band Mesh WiFi 6E
109 User Manual