View Devices Currently On The Mesh Network - NETGEAR MR90 User Manual

5. To customize the logs, scroll down and clear or select the check boxes in the Include
in Log section.
6. To refresh the log screen, click the Refresh button.
7. To clear the log entries, click the Clear Log button.
8. To email the log immediately, click the Send Log button.
You must set up email notifications in order to receive the logs. The router emails
the logs to the address that you specified when you set up email notifications. For
more information, see Set up security event email notifications on page 55.
9. Click the Apply button.
Your settings are saved.

View devices currently on the mesh network

You can view all satellites and devices that are currently connected to your mesh network.
To view devices on the mesh network:
1. Launch a web browser from a computer or mobile device that is connected to your
mesh network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Attached Devices.
The Attached Devices page displays.
The Connected Satellite table displays the following information:
• Device Name: The satellite model, device name, and IP address.
• IP Address: The satellite IP address. This IP address can change because the
router assigns an IP address to each satellite when it joins the network.
• Connection Type: The satellite is connected to the mesh network through a WiFi
or wired Ethernet connection.
Manage your Router and
Satellite
Nighthawk Tri-band Mesh WiFi 6E
114 User Manual