Table of Contents
Advertisement
570 Wheels and tyres
* NOTE Damage to the collapsible spare
wheel when lowering the vehicle
Lowering the vehicle without previously inflat-
ing the collapsible spare wheel can damage its
rim.
Inflate the collapsible spare wheel using
#
the tyre inflation compressor before low-
ering the vehicle.
* NOTE Overheating due to the tyre inflation
compressor running too long
Do not run the tyre inflation compressor
#
for longer than ten minutes without inter-
ruption.
Pull connector
4
and the hose out of the
#
housing.
Unscrew the cap from the valve on the col-
#
lapsible spare wheel.
1
Screw union nut
of the hose onto the
#
valve.
Make sure on and off switch
#
inflation compressor is set to 0.
Insert connector
4
into the cigarette lighter
#
socket or into a 12 V socket (
your vehicle.
Switch on the power supply (
#
F232 0017 02
Press on and off switch
#
tion compressor to I.
The tyre inflation compressor is switched on.
The tyre is inflated. The tyre pressure is shown
on manometer 2.
Pump the tyre to the specified tyre pressure.
#
%
The specified tyre pressure is printed on the
yellow label of the collapsible spare wheel.
When the specified tyre pressure has been
#
reached, press on and off switch
tyre inflation compressor to 0.
If the tyre pressure is higher than the specified
#
pressure, press pressure release valve button
5
until the correct tyre pressure has been
reached.
3
of the tyre
page 186) in
/
page 219).
/
3
on the tyre infla-
3
on the
Advertisement
Table of Contents
