Table of Contents
Advertisement
314 Driving and parking
If someone does become trapped when
#
you retract it, press the display switch
again immediately.
The active aerodynamics profile will then
extend once more.
Requirements
The transmission has been shifted to the park
R
position j.
The ignition is switched on.
R
Press upper or lower display button
#
repeatedly, until it displays the f symbol.
%
If the display button does not show the sym-
bol, then it is hidden. How functions are dis-
played and the order in which they are dis-
played can be set in the multimedia system
(
page 236).
/
To extend or retract: press corresponding but-
#
ton 2. Note the restricted ground clearance
when the active aerodynamics profile is exten-
ded.
The active aerodynamics profile will extend or
retract completely.
The f symbol and its colour indicate the
following positions of the aerodynamics pro-
file:
Aerodynamics profile retracted (blue)
R
Aerodynamics profile extended in different
R
positions (red)
Aerodynamics profile extends/retracts or
R
cannot be adjusted manually while the
vehicle is in motion (grey)
1
If you press button
sion process, the aerodynamics profile will
retract once more. If you press button
2
again during the exten-
2
F232 0017 02
again during the retraction process, the aero-
dynamics profile will extend once more.
%
If you pull away with the active aerodynamics
profile extended, the active aerodynamics
profile will automatically retract. Always note
the restricted ground clearance when the
active aerodynamics profile is extended.
Reversing camera
▌Function of the reversing camera
The reversing camera is only an aid. It is not a
substitute for your attention to your surroundings.
You are always responsible for safe manoeuvring
and parking. Ensure that there are no persons,
animals or objects etc., in the manoeuvring area
while manoeuvring and parking.
%
The area behind the vehicle is displayed as a
mirror image, as in the inside rear view mirror.
Advertisement
Table of Contents
