Table of Contents
Advertisement
540 Breakdown assistance
+
ENVIRONMENTAL NOTE Environmental
pollution caused by environmentally irre-
sponsible disposal
Tyre sealant contains pollutants.
Have the tyre sealant bottle disposed of
#
professionally, e.g. at a Mercedes-Benz
Service Centre.
Stow the tyre sealant bottle and the tyre infla-
#
tion compressor.
Pull away immediately.
#
Stop driving after approximately ten minutes
#
and check the tyre pressure using the tyre
inflation compressor.
The tyre pressure must now be at least
130 kPa (1.3 bar/19 psi).
& WARNING Risk of accident due to the
specified tyre pressure not being attained
If the specified tyre pressure is not reached,
the tyre is too badly damaged. The tyre seal-
ant cannot repair the tyre in this instance.
The braking and driving characteristics may be
greatly impaired.
Do not continue driving.
#
Consult a qualified specialist workshop.
#
Countries that have Mercedes-Benz Service24h:
you will find a sticker with the telephone number,
e.g. on the B‑pillar on the driver's side.
Correct the tyre pressure if it is still at least
#
130 kPa (1.3 bar/19 psi). See the tyre pres-
sure table on the fuel filler flap for values.
To increase the tyre pressure: switch on the
#
tyre inflation compressor.
F232 0017 02
To reduce the tyre pressure: press pressure
#
release button
1
next to manometer 2.
When the tyre pressure is correct, unscrew
#
the filling hose from the valve of the sealed
tyre.
Screw the valve cap onto the valve of the
#
sealed tyre.
Pull the tyre sealant bottle out of the tyre infla-
#
tion compressor.
The filling hose stays on the tyre sealant bot-
tle.
Drive to the nearest qualified specialist work-
#
shop and have the tyre, tyre sealant bottle and
filling hose replaced there.
Battery (vehicle)
Notes on the 12 V battery
& WARNING Risk of an accident due to work
carried out incorrectly on the battery
Work carried out incorrectly on the battery
can, for example, lead to a short circuit. This
Advertisement
Table of Contents
