Table of Contents
Advertisement
154 Opening and closing
2
Align brackets
of folding draught stop
#
with two rear fixtures
3
on the vehicle.
1
Perform the following steps in sequence on both
sides of the vehicle:
* NOTE Damage to the side trim
If the following step is not performed, the side
trim may be damaged.
F232 0017 02
Before inserting the folding draught stop
#
into the side fixture, pull the handle in
the direction of the arrow.
Pull handle
6
in the direction of the arrow
#
until red marking
5
is no longer visible.
1
Align folding draught stop
#
4
on the vehicle from above and insert.
with side fixture
Advertisement
Table of Contents
