Table of Contents
Advertisement
218 Climate control
To guarantee the flow of fresh air through the air
vents into the vehicle interior, note the following:
Always keep the vents and ventilation grilles in
R
the vehicle interior clear.
Keep the air inlet free of residue build-up
R
(
page 524).
/
To open or close: hold the centre of air
#
vent
1
and turn it to the left (open) or right
(closed) as far as it will go.
To set the airflow direction: hold the centre of
#
1
air vent
and move it up or down or to the
left or right.
▌Adjusting the AIRSCARF vents
& WARNING Risk of burns caused by the
heating output from AIRSCARF being too
high
When AIRSCARF is switched on, very hot air
can flow from the outlet opening in the head
restraints.
Turn the heating output down in good
#
time.
Maintain a suitable distance from the
#
outlet opening.
* NOTE Damage caused to AIRSCARF by
the use of protective covers
If a protective cover is placed over the front
seat head restraints, the flow of air from the
AIRSCARF vent is hindered.
This can cause AIRSCARF to overheat and be
damaged.
Do not use protective covers on head
#
restraints with AIRSCARF.
F232 0017 02
Make sure that no objects are covering the air
inlet grille on the back of the head restraints.
You can adjust the blower setting of AIR-
#
SCARF vents
1
using the AIRSCARF button
(
page 173).
/
You can adjust the height of AIRSCARF vents
#
1
and the current of air by adjusting the
height of the head restraints (
page 168).
/
Advertisement
Table of Contents
