Table of Contents
Advertisement
172 Seats and stowing
In particular, the health of persons with limited
temperature sensitivity or a limited ability to
react to high temperatures may be affected or
they may even suffer burn-like injuries.
Do not repeatedly switch on the seat
#
heating.
To protect against overheating, the seat heating
may be temporarily deactivated after it has been
switched on repeatedly.
* NOTE Damage to the seats caused by
objects or documents when the seat
heater is switched on
When the seat heater is switched on, over-
heating may occur due to objects or docu-
ments placed on the seats e.g. seat cushions
or child seats. This could cause damage to the
seat surface.
Make sure that no objects or documents
#
are on the seats when the seat heater is
switched on.
Requirements
The power supply is switched on.
R
Press button
1
repeatedly until the desired
#
heating level is set.
Depending on the heating level, up to three
indicator lamps will light up. If all indicator
lamps are off, the seat heating is switched off.
%
The seat heating will automatically switch
down from the three heating levels after 8, 10
F232 0017 02
and 20 minutes until the seat heating
switches off.
%
If you switch the power supply off and on
again within 20 minutes, the previous setting
of the seat heating for the driver's seat will
remain active.
%
You can set the heat distribution of the heated
sections among the seat cushions and seat
backrests of the front seats in the multimedia
system (
page 169).
/
Switching the seat ventilation on/off
Requirements
The power supply is switched on.
R
Advertisement
Table of Contents
