Table of Contents
Advertisement
398 MBUX multimedia system
Select a track.
#
Highlight the desired recording.
#
Select u options.
#
Select
Exporting to...
or Delete.
#
Setting Drag Race
Multimedia system:
TRACK PACE
Drag Race
4
5
Measuring acceleration
Select Z
Drag race
options.
#
Select Acceleration.
#
Set a starting speed or select Automatic.
#
Measurement begins as soon as the specified
starting speed has been reached.
Set a target speed.
#
Measurement stops as soon as the specified
target speed has been reached.
Start off and begin the measurement.
#
Measurement begins when the vehicle accel-
erates.
Measurement can be stopped early by interrupt-
ing the acceleration procedure.
Quarter mile race
Select Z
Drag race
options.
#
Select Quarter-mile.
#
Set a target distance.
#
Measurement stops as soon as the specified
target distance has been reached.
Start off and begin the measurement.
#
Measurement begins when the vehicle accel-
erates. Timing runs until the target distance or
a maximum of one mile has been travelled.
Measurement can be stopped early by interrupt-
ing the acceleration procedure.
Measuring braking
Z
Drag Race options
#
Select Braking.
#
Set a starting speed or select Automatic.
#
Start off and begin the measurement.
#
F232 0017 02
Brake to a stop.
#
Measurement is incremental, in steps of
10 km/h to a stop. If the braking procedure is
started e.g. at a speed of 157 km/h, meas-
urement starts as soon as 150 km/h has
been reached
Storing and calling up measured values
If measurement is completed or cancelled, a
prompt appears asking whether the measurement
should be saved.
Confirm the prompt with
OK
#
Calling up saved measurements
± Select History.
#
Select Acceleration,
Quarter-mile
#
Select a measurement.
#
The desired measurement is displayed in
detail.
or
Delete a measurement.
#
to save.
or Braking.
Advertisement
Table of Contents
