Table of Contents
Advertisement
TRENDnet User's Guide
4. At the bottom of the left hand panel, click Save.
5. Select the Config you would like to save the settings to, click Save Settings to Flash,
then click OK.
Note: This step saves all configuration changes to the NV-RAM to ensure that if the
switch is rebooted or power cycled, the configuration changes will still be applied.
© Copyright 2023 TRENDnet. All Rights Reserved.
Statistics
System > RMON > Statistics
You can remotely view individual port statistics with RMON by using your SNMP NMS
software and the RMON portion of the MIB tree.
1. Log into your switch management page (see "Access your switch management page"
on page 5).
2. Click on System, click on RMON, and click on Statistics.
3. Review the settings.
•
Index: This parameter specifies the ID number of the new group. The range is 1
to 65535.
•
Port: This parameter specifies the port where you want to monitor the
statistical information of the Ethernet traffic.
•
Owner: This parameter is used to identify the person who created an entry. It is
primarily intended for switches that are managed by more than one person,
and is an optional field.
Click Add to add the entry to the table.
PoE Web Smart Switch Series
40
Advertisement
Table of Contents
