Table of Contents
Advertisement
TRENDnet User's Guide
7. After selecting TRENDnet Hive, click Next and change your computer's network
adapter settings to obtain an IP address automatically to continue the rest of the setup
wizard.
Note: After selecting the TRENDnet Hive option and clicking Next, the switch will
immediately change the switch default IP address settings to DHCP and optain IP
address settings from your existing network.
8. Select your Time Zone, then click Next.
9. Enter the user account credentials for your TRENDnet Hive Cloud Management
account to register the switch with your account, then click Next.
10. The summary page will display all of the configuration settings that were applied
through the setup wizard. Click Apply to complete the setup wizard.
Note: You may want to note the new password and IP address settings for local
management access to the switch.
© Copyright 2023 TRENDnet. All Rights Reserved.
10. To verify the switch is now successfully registered with your TRENDnet Hive Cloud
Management account, the Hive button in the top right will be green to indicate
successful registration.
Section B: Configuring the switch for local network management
1. Assign a static IP address to your computer's network adapter in the subnet of
192.168.10.x (e.g. 192.168.10.25) and a subnet mask of 255.255.255.0.
2. Open your web browser, and type the IP address of the switch in the address bar, and
then press Enter. The default IP address is 192.168.10.200.
3. Enter the User Name and Password, and then click Login. By default:
User Name: admin
Password: admin
Note: User name and password are case sensitive.
4. Select Next to move onto the next screen
Note: If the switch setup wizard does not appear, you can click the setup wizard button
in the top right section of the switch management page to access the switch setup
wizard.
PoE Web Smart Switch Series
3
Advertisement
Table of Contents
