Setting The Calendar/Clock - Fujitsu SRS-1050 User Manual

SRS -1050 Local Features (
ENTER DIRECTORY NUMBER
DN=8247629,99,,2502
If the number stored on the one-
touch button is more than 16
digits, a right arrow (
at the end of the line of numbers,
indicating that additional numbers
exist. To see the additional
numbers, press NEXT (softkey 2).
Pressing NEXT repeatedly
alternates between the two
displays.
ENTER DIRECTORY NUMBER
DN=94783664,1994,,7è(14)
ENTER DIRECTORY NUMBER
DN=è437709
3. Complete the procedure in one
of these ways:
• To change the number, enter a
new number. Then press
ENTER (softkey 1).
The new number appears on
the display as you enter it, and
replaces the old number.
• To cancel the number, press
CLEAR (softkey 3) and then
ENTER. The button is
canceled as a one-touch
button, and the green indicator
goes dark.
Page 3-6
(12)
è
) appears
(14)
Get other manuals https://www.bkmanuals.com
• To leave the number
unchanged, press REGISTER
(softkey 4) to return to the
normal display.
SETTING THE
CALENDAR/CLOCK
The normal SRS-1050 display
includes the date, time, and day of
the week. You can set the date
and time by using the procedure
described below.
Notes on Entering
Information
If the value you have entered is
acceptable, press ENTER to
record it and display the next
parameter screen.
To retain the currently displayed
calendar/clock value for a
parameter, you can press ENTER
without bothering to reenter the
value.
To change a numerical entry (not
including menu selections) before
you press ENTER, press CLEAR
(softkey 3) and enter the desired
value.
To change a menu selection or a
numerical entry after you press
ENTER, press asterisk (*). This
returns you to the preceding data
entry screen, where you can enter
the correct information.
Chapter 3