Page 1
ISDN Digital Set User's Guide SRS-1050 National ISDN Please click on the individual chapter titles highlighted in blue in the Table of Contents (pages 12 through 13) to view specific chapters. Fujitsu Delivering on the promise of ISDN...
Page 2
Printed in the United States of America. This publication may be replaced by a revised edition. To find out if a revision exists, or to order copies of publications, write to Fujitsu Network Communications, Inc. 4403 Bland Road, Somerset Park, Raleigh, NC 27609, or call 1-800-228-ISDN.
Page 3
( Fujitsu SRS-1050 Warning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Fujitsu SRS-1050 ( FCC Notice This equipment complies with Part 68 of the FCC Rules. The FCC Part 68 Label is located on the bottom of the enclosure. This label contains the FCC Registration Number for this equipment. If requested, the FCC Registration Number and the following information must be provided to your telephone company.
Preface This guide provides descriptions and procedures for using Fujitsu's Digital Set Feature Phone, called the SRS-1050, when it is attached to a switch supporting National ISDN. This guide is for anyone interested in using the SRS-1050 to gain the benefits of the combined voice and data network capabilities of ISDN technology.
( EWSD ......Required for Siemens Systems. Note: 5ESS, DMS-100, and EWSD are registered trademarks of Lucent, Nortel, and Siemens Telecom Networks respectively. Helpful Tips About Your SRS-1050 Because ISDN technology is new, some features of your SRS-1050 may be unfamiliar. Page 6...
( Fujitsu SRS-1050 Softkeys The softkeys are the four keys located just below the display. When you press the KEY MENU button to their right, function labels appear on line 2 of the display. DATA CLEAR Key Menu Standard Softkey Layout (The DATA softkey label appears only if you have the data model.)
ISDN CONCEPTS: INTEGRATED VOICE AND DATA ISDN stands for Integrated Services Digital Network, which provides many voice and communication features. (The SRS-1050 data features, available with the optional data terminal adapter, are described in Chapter 4, "Data Operation".) The basic ISDN service provides two 64,000 bits per second "B"...
• They allow the incoming directory number to be displayed if it is available. Data Features The optional data features of the SRS-1050 include the following capabilities: • Communication on the D-channel using packet switching with an asynchronous RS-232 terminal at terminal speeds up to 19,200 bits per second.
Page 10
SPID For your SRS-1050 to work on a multipoint line, it must have a valid Service Profile Identifier (SPID). The SPID number is usually entered when the SRS-1050 is installed. So if your digital set already has a SPID number, you don't have to reenter it.
Page 11
Your System Administrator may be your phone company representative or a member of your telecommunications department. Call Appearance Preference The SRS-1050 allows you to specify which Call Appearance button it selects when you go offhook (lift the receiver or press SPEAKER). You have four choices: •...
Page 12
(CLICK ON HIGHLIGHTED TEXT BELOW) Section Page Chapter 1 Getting Acquainted With Your Digital Set ......1-1 SRS-1050 Components ............1-3 Switches and Connectors ............. 1-4 MULTIFUNCTION BUTTONS ..........1-5 CALL INFORMATION DISPLAYS ........1-8 SOFTKEYS AND KEY MENU ..........1-8 Chapter 2 INTRODUCTION TO VOICE FEATURES ......
Page 13
( Fujitsu SRS-1050 Section Page REINITIALIZING THE PHONE..........3-8 UNANSWERED CALL LOGGING (UNA)......3-9 Enabling the UNA Feature........... 3-9 UNA on All Call Appearances........... 3-10 UNA on Selected Call Appearances ........3-10 Disabling the UNA Feature..........3-11 HANDSFREE, HANDSET, AND HEADSET MODES ..3-11 Switching from Headset Back to Handset Mode ....