Table of Contents
Advertisement
SRS -1050 Voice Features (
To turn the microphone back
on, press MIC-OFF again; its
red LED will go dark.
3. When your conversation ends,
hang up by pressing SPEAKER.
Note the call duration; it
vanishes after about three
seconds.
(See also "Handsfree, Handset,
and Headset Modes", in Chapter
3, "Local Features".)
If you are already talking on
another call
1. Dispose of the active call in one
of the following ways:
a. End the call by pressing
SPEAKER. Then press
SPEAKER and if necessary,
press the green-flashing Call
Appearance button to
answer the incoming call.
or
b. Retain the call by pressing
the green-flashing Call
Appearance button to
answer the incoming call.
(The first call is
automatically put on hold.)
Page 2-8
Get other manuals https://www.bkmanuals.com
2. Converse with the calling party.
(If the MIC-OFF LED is red, the
microphone has been turned off.
Press MIC-OFF to turn it back
on.) You can turn off the
microphone by pressing the
MIC-OFF button; its LED will
turn red. No sound will then be
transmitted to the called party,
allowing you to have a private
conversation with others in the
room. To turn the microphone
back on, press MIC-OFF again;
its red LED will go dark.
3. When your conversation ends,
hang up by pressing SPEAKER.
Note the displayed call
duration; it vanishes after about
three seconds.
4. You may then pick up the call
you were originally talking on, if
it was held, by pressing its red-
flashing Call Appearance button
and then pressing SPEAKER.
(See also "Handsfree, Handset,
and Headset Modes", in Chapter
3, "Local Features".)
Chapter 2
Advertisement
Table of Contents
