Drop; Transfer (5Ess); Transfer (Dms-100) - Fujitsu SRS-1050 User Manual

Chapter 2
Dropping Out of the
Conference Call Yourself
Some installations leave the other
conference participants
connected if you disconnect.
Ask your System Administrator
whether your Conference feature
works this way.
Otherwise, when you disconnect,
all other conference participants
are disconnected also.

DROP

Cancels connection with the
last party added to a
conference call or
disconnects call if only two
participants are connected
(5ESS)
Drop is a network-based feature
that you must subscribe to from
your telephone company. This
description assumes that you
have assigned the Drop feature to
one of your SRS-1050 function
buttons.
Pressing DROP at the end of a
regular call does nothing.
( DMS-100
Pressing DROP at the end of a
regular two-party call disconnects
the call.
Get other manuals https://www.bkmanuals.com
( SRS -1050 Voice Features

( 5ESS
During a conference call, the
DROP feature allows the
originator of the call to drop the
last participant added. Other
participants can drop out of the
call simply by hanging up.
You can use the DROP button
repeatedly until you have
dropped everyone but the
participant of the original two-
party call. To end the call, hang
up normally.
DMS-100
Warning: Pressing DROP at the
end of a conference call drops
both participants.
Using DROP on a Conference
Call
Press the DROP button. This
ends your connection with the
last party you added to the call,
but any others on the call stay
connected. If only two parties
remain, the call is disconnected.
The display of the call's duration
continues until the call is over.
TRANSFER ( 5ESS
Transfers a call to another
phone and announces the
transfer privately
To transfer a call, follow these
steps:
(
Page 2-15