Hold; Conference - Fujitsu SRS-1050 User Manual

Chapter 2
Using REDIAL after lifting the
handset or pressing
SPEAKER
1. If you don't hear a tone, press an
idle Call Appearance button.
2. Press REDIAL. The last number
dialed appears on the display
and is dialed automatically.

HOLD

Retains connection with an
existing call until you can
return to it
HOLD lets you keep a call active
even though you are no longer
directly connected with it. This
feature is useful if you need to
perform some action away from
your phone, such as looking up
some information.
The autohold feature
automatically puts an active call
on hold whenever you press
another Call Appearance. You
can also press HOLD to manually
put a call on hold.
1. To use hold, press HOLD while
you have an active call in
progress. The Call Appearance
LED changes from steady red to
flashing red.
Get other manuals https://www.bkmanuals.com
( SRS -1050 Voice Features
2. To use another Call Appearance
or feature button, press it. The
phone retains each call you
place on hold until you
reconnect with it (or the other
party hangs up). You are now
free to take other actions,
including making and receiving
other calls.
3. To reconnect with a call on hold,
press its flashing Call
Appearance button. Its LED
changes from flashing red to
steady red, and you are
reconnected in handsfree mode.
(You can use the handset, if you
prefer, by lifting it.)

CONFERENCE

Telephone conferences with
multiple participants
Conference is a network-based
feature that you must subscribe
to from your telephone company.
This description assumes that
you have assigned the
Conference feature to one of your
SRS-1050 function buttons.
The number of conference call
participants allowed depends on
the number specified when you
subscribe to the feature. Ask
your System Administrator how
many participants are allowed on
your Conference feature.
Page 2-13