Table of Contents
Advertisement
5 – Front Panel Operation
Output Control Keys
Output control keys control the output functions of the dc source.
Voltage
Press this key to access the voltage menu.
Display
VOLT <value>
Current
Press this key to access the current menu.
Display
CURR <value>
Output
Press this key to access the output menu list.
Display
*RST
PON:STATE <char>
RI <char>
DFI <char>
DFI:SOUR <char>
PORT <char>
DIGIO <char>
PROT:DLY <value>
TYPE:CAP <char>
Protect
Press this key to display protection status.
Display
OC OT OV RI --
-- -- -- -- --
Shift
OV
Press this key to access the overvoltage protection menu.
Display
PROT:STAT <char>
PROT:LEV <value>
Shift
Cal
This key accesses the calibration menu (Refer to Appendix B for details).
Notes:
1
These parameters are stored in non-volatile memory
2
These status summary bits are explained in chapter 7
value = a numeric value
char = a character string parameter
Use
Use
Use
38
Command Function
Sets the output voltage
Command Function
Sets the output current
Command Function
Places the dc source in the factory-default state
Select the power-on state command (RST or RCL0)
Sets the remote inhibit mode (LATCHING, LIVE, or OFF)
Sets the discrete fault indicator state (ON or OFF)
Selects the DFI source (QUES, OPER, ESB, RQS, or OFF)
Sets the output port functions (RIDFI or DIGIO)
Sets and reads the I/O port value (0 through 7)
Sets the output protection delay in seconds
Sets the output compensation (HIGH or LOW)
Command Function
Status of the protection features (example shows all tripped)
Status of the protection features (example shows none tripped)
Command Function
Enables or disables overvoltage protection (ON or OFF)
Sets the overvoltage protection level
and
to scroll through the menu commands.
and
to scroll through the menu parameters.
and
to select a digit in a numeric entry field.
1
1
2
1
1
Advertisement
Table of Contents
