Troubleshooting; Customer Service; Messages Of The Control - Dürkopp Adler 513 Operating Instructions Manual

Troubleshooting

Error Description
E-001 Pedal not in the
center position
E-002 Pause
E-003 Machine head
error
Operating Instructions 513/533 - 01.0 - 09/2023
9 Troubleshooting
9.1

Customer Service

Contact for repairs and issues with the machine:
Dürkopp Adler GmbH
Potsdamer Str. 190
33719 Bielefeld, Germany
Tel. +49 (0) 180 5 383 756
Fax +49 (0) 521 925 2594
Email: service@duerkopp-adler.com
Internet: www.duerkopp-adler.com
9.2

Messages of the control

Possible cause
When pressed, the pedal is set
to sewing readiness status.
Reset button pressed while
sewing.
Machine stopped.
Machine head is tilted back.
Troubleshooting
Make sure the pedal is not
pressed when the sewing
readiness status is active.
• Press the Reset button.
• Trigger the thread trimmer.
• Start the sewing process
anew.
• Tilt the machine head back
into place.
105