Sewing - Dürkopp Adler 513 Operating Instructions Manual

36
2. To set the desired seam pattern numbers, press the
buttons. You can adjust the scaling of the X- and Y-axis and
the speed as described here  p. 32.
3. Press the
 The LED illuminates, and the machine is ready for sewing.
Important
Toggling between standard seam patterns, seam patterns (P)
or seam pattern sequences (C) requires that the customer has
registered at least one seam pattern (P).
4.2.5

Sewing

Fig. 15: Sewing
①
(1) - Pedal position 1
To sew:
1. Place the sewing material under the sewing foot.
2. Press the pedal to position 1 (1) to lower the sewing foot
and release it to raise the sewing foot again.
3. Press the pedal to position 2 (2) to begin sewing.
 At the end of the sewing process, the sewing foot is raised
and returns to its initial position.
button.
(2) - Pedal position 2
Operating Instructions 513/533 - 01.0 - 09/2023
Programming
②