Checking Seam Patterns (P) - Dürkopp Adler 513 Operating Instructions Manual

34
6. To finish adjusting the setting, press the
 The sewing foot moves and lifts, and the LED illuminates to
indicate the sewing status.
7. Press the
Important
If the power supply is switched off before you press the
the set values will NOT be saved.
Information
The customer can only change the standard seam patterns
temporarily. The changed values will be lost after switching off
the machine. Permanent changes can only be made to the seam
patterns (P).
4.2.3

Checking seam patterns (P)

NOTICE
Property damage may occur!
The seam pattern (P) must match the sewing foot as sewing
foot and needle may otherwise collide, resulting in needle
breakage.
Select a seam pattern (P) that matches the sewing foot!
To check the seam pattern (P):
1. Press the
 The LED illuminates.
2. Press the
 The menu for confirming the seam pattern (P) is displayed:
button to make the machine ready for sewing.
button.
button.
Operating Instructions 513/533 - 01.0 - 09/2023
Programming
button.
button,