Setting The Paper Type And Size Of The Tray 1 On The Control Panel - Fuji Xerox DocuPrint C1110 User Manual

Setting the Paper Type and Size of the Tray 1 on the Control Panel

When loading paper in the tray 1, you must set the size and type of the paper on the control
panel.
By default, each time you load paper into the tray 1, the printer displays a message on the
control panel to prompt you to set the size and type of the paper. Follow the message on
the display and set the size and type of the paper loaded in the tray 1.
You can also program your printer not to display the message by selecting [Off] under
[Display Screen] on the control panel. For information about [Display Screen], refer to "
Display Screen" (P. 98). If you selected [Off], set the size and type of the paper loaded in
the tray 1 from the menu screen displayed on the control panel.
The default paper type and size for the tray 1 are [Plain Paper] and [A4 Portrait],
respectively. If you loaded paper other than the default paper type and size into the tray,
change its paper type and size on the control panel.
Make sure to set the paper type correctly on the control panel. If the paper type setting does
not match the actual type of the paper, toner may not fuse properly onto the paper, resulting
in smearing and poor print quality.
The following describes how to set the paper type and size from the menu screen displayed
on the control panel.
Setting the Paper Type of the Tray 1
Use the following procedure when setting the paper type of the tray 1.
1. Press the <Menu> button on the control
panel to display the menu screen.
2. Press the < > button until [Tray Settings]
is displayed.
3. Press the < > or <Eject/Set> button to
accept the selection.
[Tray 1] is displayed.
4. Press the < > or <Eject/Set> button to
accept the selection.
[Paper Type] is displayed.
5. Press the < > or <Eject/Set> button to
accept the selection.
The current setting is displayed.
6. Press the < > button until the correct
paper type is displayed for the loaded
paper.
(Example: Heavyweight 1)
7. Press the <Eject/Set> button to confirm
your selection.
78
4 Paper
Menu
Report / List
Menu
Tray Settings
Tray Settings
Tray 1
Tray 1
Paper Type
Paper Type
Plain Paper *
Paper Type
Heavyweight 1
Paper Type
Heavyweight 1 *