OM-2032 / Operation and Maintenance Manual
100D20 / Generator Sets
(2) Reinstall engine control panel
a. Maneuver panel into position and align mounting holes. Install mounting screws and secure.
b. Secure wire conduit in its original position with clamp and screw.
9. Maintenance of the 28.5-V DC output
Though the 28.5-V DC output should be periodically inspected, it requires no scheduled maintenance
and should operate for long periods of time without servicing.
Chapter 2-1
Page 12
Engine Control Panel in Tilt-Out Position
Figure 9
March 31/94 Revised