Table of Contents
Advertisement
OTHER BASIC PROCEDURES — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Correctly Using the Embroidery Frames
Various types of embroidery frames can be used with this machine to suit your project.
In addition to the four included embroidery frames, there are many frames that can be used with this
embroidery machine. (Refer to "Optional accessories" on page 24.)
CAUTION
●
Only use embroidery frames of the sizes indicated in the screen, otherwise the
embroidery frame may hit the presser foot, which may result in injuries.
Embroidery frame holders
Two types of embroidery frame holders
(embroidery frame holder A and embroidery frame
holder B) are included with this machine.
Embroidery frame holder A is used with the four
included embroidery frames. Embroidery frame
holder B is used with the optional embroidery
frames. In addition, if optional embroidery frame
holder C is used, a frame from the optional round
frame series can be installed. For details on which
embroidery frame can be installed on each
embroidery frame holder, refer to "Types of
embroidery frames/frame holders and their
applications" on page 91.
1 Embroidery frame holder A
2 White corner covers
3 Embroidery frame holder B
4 Light gray corner covers
5 Magnet
6 Embroidery frame holder C (optional)
7 Dark gray corner covers
90
When difficult to replace the
embroidery frame
Depending on the position of the needle bars, it
may be difficult to replace the embroidery frame. In
that case, follow the procedure described below to
move the embroidery frame.
1
Touch
.
The needle bar move screen appears.
2
Touch
.
The carriage automatically moves to a
position where the embroidery frame can
easily be replaced.
• Touch
to close the needle bar
move screen and to move the carriage to
the previous position.
Advertisement
Table of Contents
Troubleshooting
