Uninterrupted Embroidering (Monochrome) - Brother 884-T11 Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
5 Touch
stop button to begin embroidering.
1
1 The needle bar number changes and
appears to indicate the selected needle bar.
Embroidering continues with the specified
needle bar.
● Temporary needle bar setting only applies
until the next color change. If the pattern
contains another area with the same color
or when the same pattern is sewn the next
time, the area is sewn with the original
color.
● The thread color (needle bar) can be
changed with this procedure even when
the machine has been stopped with a
specified pause or at the time of spool
change.
● If the start/stop button was pressed to stop
the machine while an area was being
sewn, a temporary needle bar setting
cannot be applied. The thread color
(needle bar) cannot be changed in the
middle of an area that is being sewn.
, and then press the start/
Memo
Uninterrupted embroidering
(monochrome)
A selected pattern can be stitched out in one color
instead of multicolor. The machine will hesitate but
not stop between color steps, and then continue till
the pattern is completed.
1 Touch the key for the needle bar threaded
with the thread you wish to embroider
uninterruptedly.
2 Touch .
The temporary needle bar setting screen
appears.
Temporary Needle Bar Setting 143
4