Brother 884-T11 Operation Manual page 118

OTHER BASIC PROCEDURES — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
As you move to the area where your design
was last stitched, by touching the
, the embroidery frame will move,
allowing you to place the cross mark
directly on the last stitch shown.
Note
● It is recommended to stitch over the top of
the last two or three stitches for complete
coverage.
1 Stitch line
2 Cross mark
If the needle bar is moved back too far
through the stitching, touch
to go forward through the stitching.
1 Each touch of this key moves one stitch forward
through the stitching.
2 Each touch of this key moves ten stitches
forward through the stitching.
5 Touch .
116
6 Touch
or
The embroidering screen appears again.
7 Touch
stop button to continue embroidering.
1
2
or
1
2
.
, and then press the start/