Brother 884-T11 Operation Manual page 196

SELECTING/EDITING/SAVING PATTERNS — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
■ Repeating one element of a repeated pattern
By using the Cut function, you can select one
element of a repeated pattern and repeat only
that single element. This function allows you to
design complex repeated patterns.
1 Choose the direction in which the repeated
pattern will be cut.
• Touch to cut horizontally.
• Touch to cut vertically.
The pattern direction indicator will change
depending on the direction selected.
2 Use and
The cut line will move.
194
to select the cut line.
3 Touch .
The repeated pattern will be divided into
separate elements.
4 Touch .
5 Use and to select the element to
repeat.
6 Repeat the selected element.