Remove The Fixing Plates; Adjusting The Operation Panel Position - Brother 884-T11 Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Remove the fixing plates

CAUTION
●
Remove the fixing plates before turning
on the machine, otherwise the machine
may malfunction.
1 Using the included Phillips screwdriver,
remove each of screws on the fixing plates.
1 Screws
2 Fixing plates
● After removing the fixing plates, be sure to
keep them to be used again. Before
transporting the machine, consult your
authorized Brother dealer.
Memo
Adjusting the operation
panel position
Adjust the orientation and angle of the operation
panel so it can easily be operated.
1 Loosen 2 thumb screws to bring the
operation panel forward.
1 Thumb screws
2 Adjust the operation panel to an easy-to-
operate position, and then tighten the thumb
screws.
Setting Up the Machine 29
1