Brother 884-T11 Operation Manual page 258

APPENDIX — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
8 An image of the needle location appears in
the screen with the positioning detection
area framed by a red line. Affix an
embroidery positioning sticker so that it fits
within the red line, and then touch
1
1 Red line
• The positioning detection area is under the
built-in camera.
1 Built-in camera is in this box.
2 Affix the sticker in this area.
256
9 When the machine's built-in camera has
finished detecting the location of the
embroidery positioning sticker, the following
message appears.
.
Note
● If the built-in camera cannot detect the
location of the embroidery positioning
sticker, the following error message
appears. Touch
the procedure again starting from step
0 Remove the jumbo frame from the
embroidery machine, turn the frame around,
and then attach it to the machine.
, and then perform
8
.