Brother 884-T11 Operation Manual page 201

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
0 Touch
a Touch the positioning keys to move the
embroidery frame until the thread mark on
the fabric is aligned on the starting point in
the camera view window.
1 Grid lines
2 Thread mark on the fabric
3 Positioning keys
• Touch
position.
● Touch
By enlarging the camera view, you can
make a close adjustment for the needle
drop position moving the embroidery
frame little by little.
to display the grid lines.
to check the embroidering
Memo
to enlarge the camera view.
b If the pattern position cannot be aligned
using the positioning keys, rehoop the fabric,
and then try again to align the position with
the positioning keys.
● After you have aligned the position of the
combined border pattern, do not rotate the
pattern in the embroidery settings screen.
If the pattern is rotated in the embroidery
settings screen, you cannot sew the pattern
properly aligned even if the thread mark
and the starting point are aligned in the
camera view window.
c Touch
screen.
d Remove the thread mark.
e Touch
f Touch
1
stop button to start embroidering.
2
3
Editing the Embroidery Pattern (Pattern Editing Screen) 199
Note
to return to the previous
.
, and then press the start/
5