Maintenance; Maintenance Safety; Recommended Maintenance Schedule(S) - Toro Z Master Revolution Series Operator's Manual

Maintenance

Note:
Determine the left and right sides of the machine from the normal operating position.
WARNING
Modifying the original machine, parts,
and/or accessories may alter the warranty,
controllability, and safety of the machine.
Making unauthorized modifications to the
original machine and/or not using genuine
Toro parts could lead to serious injury or
death.
• Do not make unauthorized modifications to
the machine, parts, and/or accessories.
• Use only genuine Toro parts.

Maintenance Safety

•
Before adjusting, cleaning, servicing, or leaving
the machine, do the following:
– Park the machine on a level surface.
– Disengage the drives and the power take-off.
– Engage the parking brake.
– Shut off the machine and remove the key.
– Wait for all moving parts to stop.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 50 hours
After the first 100 hours
Before each use or daily
Every 50 hours
Every 100 hours
Every 500 hours
Before storage
Yearly
Maintenance Procedure
• Change the transmission fluid.
• Check the wheel-lug nuts.
• Check the safety-interlock system.
• Check the seat belt.
• Inspect the blades.
• Clean under the mower deck.
• Clean the suspension system.
• Check the tire pressure.
• Lubricate the mower deck-lift pivots.
• Change the transmission fluid.
• Paint chipped surfaces.
• Perform all maintenance procedures before storage.
• Grease the caster-wheel hubs.
– Allow machine components to cool.
•
Carefully release pressure from components with
stored energy.
•
Check the parking brake operation frequently.
Service the brake as needed.
•
Never tamper with safety devices. Check their
proper operation regularly.
•
Do not rely solely on mechanical or hydraulic jacks
to support the machine; support the machine with
jack stands whenever you raise the machine.
•
Use care when checking the blades. Wrap the
blades or wear gloves, and use caution when
servicing the blades. Only replace or sharpen the
blades; never straighten or weld them.
•
On multi-bladed machines, take care as rotating
one blade can cause other blades to rotate.
•
Keep your hands and feet away from hot surfaces.
•
Keep all hardware tightened, especially the
blade-attachment hardware.
37