Toro Z Master Revolution Series Operator's Manual page 12

Note:
This machine complies with the industry standard stability test in the static lateral and longitudinal tests with the maximum
recommended slope indicated on the decal. It is important that each operator review the slope operation instructions in the operator's
manual and review the conditions in which the machine is being operated to determine if the machine may be operated in the conditions
that day and on that site. Changes to terrain can result in a change in slope operation for any machine.
1. Warning—read the Operator's Manual; all operators should
be trained before operating the machine; wear hearing
protection.
2. Cutting/dismemberment hazard of the fingers—keep hands
away from moving parts; keep all guards and shields in place.
3. Thrown object hazard—keep bystanders away.
145-3665
4. Tipping hazard—when loading onto a trailer, do not use dual
ramps; only use a singular ramp wide enough for the machine
and that has an incline less than 15°; back up the ramp (in
reverse) and drive forward off the ramp.
5. Runover/backover hazard—do not carry passengers; look
behind you and down when mowing in reverse.
6. Tipping hazard on slopes—do not use on slopes near open
water; do not use on slopes greater than 15°.
12
decal145-3665