Entering The Operator's Position; Starting The Machine; Shutting Off The Machine; Operating The Mower Blade-Control Switch (Pto) - Toro Z Master Revolution Series Operator's Manual

Entering the Operator's
Position
Use the mower deck as a step to get into the
operator's position.
Figure 29
1. Step here.

Starting the Machine

1. Sit on the seat.
2. Turn the key switch to the O

Shutting Off the Machine

CAUTION
Children or bystanders may be injured if they
move or attempt to operate the machine while
it is unattended.
Always remove the key and engage the
parking brake when leaving the machine
unattended.
1. Disengage the PTO.
2. Move the motion-control levers outward to the
P position.
ARK
Note:
The electric brake will engage
automatically.
3. Turn the key switch to the O
remove the key.
4. Wait for all moving parts to stop before leaving
the operating position.
g398621
position.
N
position and
FF
25
Operating the Mower
Blade-Control Switch (PTO)
The blade-control switch (PTO) starts and stops the
mower blades.
DANGER
The rotating blades under the mower deck are
dangerous. Blade contact will cause serious
injury or death.
Do not put your hands or feet under the mower
or mower deck when the blades are engaged.
DANGER
An uncovered discharge opening allows
objects to be thrown toward you or
bystanders. Also, contact with the blade
could occur. Thrown objects or blade contact
will cause serious injury or death.
Do not operate the mower with the discharge
deflector raised, removed, or altered unless
a grass collection system or mulch kit is in
place and working properly.
Engaging the Blade-Control
Switch (PTO)
Figure 30
Disengaging the Blade-Control
Switch (PTO)
Figure 31
g396175
g425088