Canon imageCLASS LBP6780dn Service Manual page 75

2
Technology > MEAP > Preparation for Using SMS > Device Settings
9) If the [Security Warning] appears, click the [Yes] button. (It does not appear when installing
the same certificate again.)
10) A message will appear to indicate that import has been completed successfully. Click
the [ OK ] button.
2 Technology > MEAP > Preparation for Using SMS > Device Settings
F-2-67
F-2-68
● Network Port Settings
The default port of the HTTP server used for MEAP and MEAP applications to provide the
servlet function is 8000, and the HTTPS server's default port is 8443. In the case that these
ports have already used by the customer who is to introduce this application, the MEAP
application cannot use the HTTP (or HTTPS) server(s).
By changing the following ports to use, however, the MEAP application can be used as well
as the existing system.
The procedure for setting the HTTP/HTTPS server port is shown below.
1) Start service mode. From the [ Setup ] menu, select [ SERVICE MODE ] > [ FUNCTION
GR. ] > [ MEAP ].
Setup
MEAP Settings
SERVICE MODE
Check Counter
ADJUST GR.
SERVICE MODE
OPTION GR.
Initialize Menu
FUNCTION GR.
LOG GR.
2) To set up the HTTP server port, select [ MEAP-PN ]. To set up the HTTPS server port, select [
MEAP-SSL ]. When the port number setting screen appears, specify a port number. Use
the Up and Down keys to specify the setting.
MEAP
MEAP-PN
MEAP-SSL
CDS-MEAP
CDS-FIRM
Note:
A port number can be any integer from 0 to 65535. To avoid port numbers that are
frequently used, do not use any integer from 0 to 1023.
Server Setting value
HTTP Server 1024 to 65535
HTTPS Server 1024 to 65535
2-39
FUNCTION GR.
ECONF
USB-H
SUBLOG TO USB
MEAP
F-2-69
MEAP-SSL
8443
(0-65535)
F-2-70
Default value / Value after RAM clear
8000
8443
T-2-13
2-39