System Application Management; Password Authentication - Canon imageCLASS LBP6780dn Service Manual

2
Technology > MEAP > System Application Management > Password authentication

System Application Management

This function manages the login services for logging in to SMS.
There are two login methods: one is "password authentication" where you enter the password
for SMS on the SMS login screen and log in, and the other is "RLS authentication" where you
do not use the SMS login screen but enter the user ID and password on the RLS (Remote
Login Service) screen for authentication.

■ Password authentication

Enter the password on the SMS login screen for authentication. Only one password can be
set for SMS.
The login procedure is shown below.
1) Access SMS from the browser of a PC on the same network as the MEAP device. The URL
is as follows.
URL: https://<IP address of MEAP device>:8443/sms/
Ex.) https://172.16.188.240:8443/sms/
Note:
To encrypt the password information input when logging in, SSL of the login screen
was made effective. However, it is redirected to new URL (effective SSL) even when
accessing with URL (non-SSL) before.
2) Enter the password in the password entry field, and click the [Log In] button. The default
password is "MeapSmsLogin." (The password is case-sensitive.)
2 Technology > MEAP > System Application Management > Password authentication
Note:
If you want to change the display language, select the language from the drop-down list
of [Language] at the upper right of the login screen, and click the update button.
Note:
If the wrong password is entered, the following window is displayed. The user's system
administrator may have changed the password, so confirm the password with the
system administrator. Note that there is no special password for service.
F-2-146
2-69
F-2-147
F-2-148
2-69