Initializing The Scanner; Service And Repair - Radio Shack Pro-164 Manual

Initializing the Scanner

If.the.scanner's.display.locks.up.or.does.not.
work.properly.after.you.connect.a.power.source.
or.install.batteries,.you.might.need.to.initialize.it.
Caution: This procedure clears the scanner's
memory. Initialize the scanner only after trying
all other methods to correct issues.
To initialize the scanner:
1.. Turn.off.the.scanner,.then.turn.it.on.again..
"Multi-system.Trunking.Scanner".appears.
2.. While."Multi-system.Trunking.Scanner".
appears,.press.0.
3.. Press.1.
4.. Press.ENT.."Initializing.please.stand.by".
appears.for.about.5.seconds..When.the.
initialization.is.complete,.M000.appears.on.
the.second.line.of.the.display..Bank.0.Ch.00.
appears.
Do not turn off the scanner until the
initialization is complete.

Service and Repair

If.your.scanner.is.not.performing.as.it.should,.
take.it.to.your.local.RadioShack.store.for.
assistance..To.locate.your.nearest.RadioShack,.
use.the.store.locator.feature.on.RadioShack's.
web.site.(www.radioshack.com),.or.call.1-
800-The.Shack.(800-843-7422).and.follow.the.
menu.options..Modifying.or.tampering.with.
the.scanner's.internal.components.can.cause.
a.malfunction.and.might.invalidate.its.warranty.
and.void.your.FCC.authorization.to.operate.it.