To delete a Talk Group ID:
1.. Press.PGM.then.TRUNK.
2.. Press.FUNC,..or..to.select.ID.memory.
3.. Press.FUNC.then.CL.
To delete ALL talk group IDs in a bank:
1.. Press.PGM.
2.. Press.TRUNK.to.enter.a.Talk.Group.ID.
memory.mode.
3.. Select.a.Talk.Group.ID.bank.using.FUNC,..
or..
4.. Press.FUNC.then.6.."Clear.entire.list?.Press.
1.to.clear.all,.any.other.key.aborts".appears.
5.. To.clear.the.Talk.Group.IDs,.Press.1..To.
cancel.the.deletion,.press.any.key.except.1.
Saving Trunking Channels
Trunking channels are defined using the
same.procedure.for.non-trunking.channels..
In.each.bank,.you.can.mix.channel.modes,.
including.conventional,.but.you.can.scan.only.
one.trunking.mode.at.a.time,.either.EDACS,.
Motorola,.or.LTR.
Because.Motorola.control.frequencies.
change.daily,.you.should.save.all.the.control.
frequencies.in.the.same.bank..If.you.do.not.
know.the.control.frequency,.save.all.the.
Motorola.frequencies.in.the.same.bank.
EDACS.frequencies.are.assigned.Logical.
Channel.Numbers.(LCN).and.organized.in.a.
specific order. To scan correctly, you must
program.the.frequencies.in.LCN.order,.starting.
with.Memory.01.
0
Trunked mo
be selected
MHz that u
For informa
a channel,
Trunk Sca
In.each.bank,.you
channels.and.freq
you.can.scan.only
either.EDACS,.Mo
To.focus.on.trunk
scan,.you.turn.off
conventional.cha
For.Motorola.cha
the.Talk.Group.ID
frequency,.voice.
ID.number.
To.change.the.sca
.
Your scann
audio while
data. Howe
SQ clockwi
just after th
scanner qu
For Motoro
than one ta
time. If you
you will he
channel, bu
between al