If A Problem Occurs - Sennheiser PX 360 BT Instruction Manual

If a problem occurs ...

Problem Possible cause
No operation The battery pack
indicator – is flat.
headphones
cannot be
switched on
No audio The jack plug of
signal when the audio cable
the audio cable is not properly
is connected connected.
No audio The headphones
signal during are switched off.
Bluetooth
The headphones
connection
are not paired
with an audio
source.
The Bluetooth
function on the
headphones is
switched off.
The audio cable is
connected to the
headphones.
The volume is
adjusted too low.
Headphones The pairing does
cannot be not work.
paired
The audio source
is switched off.
No audio The headphones
signal during are switched off.
NoiseGard
The TalkThrough
operation
function is
switched on.
When in Talk-
Through mode,
the audio signal
is not available.
If a problem occurs ...
Solution
Recharge the battery pack.
Check the connection to
your audio source.
Switch the headphones on.
Check if the headphones are
paired. If necessary, pair the
headphones with the audio
source again.
Switch the Bluetooth func-
tion on the headphones on.
The connection of the
audio cable automatically
switches off the Bluetooth
connection. Remove the
audio cable and then switch
the Bluetooth function on
again.
Increase the volume.
Check if the audio source
supports the A2DP profile. If
not, use one of the optional
dongles.
Switch the audio source on.
Switch the headphones on.
Switch the TalkThrough
function off.
Page
9
16
12
13
18
16
18
–
13
12
18
23