Sennheiser PX 360 BT Instruction Manual page 16

1
5
²
Disconnecting the Bluetooth connection
The Bluetooth button
The backlighting goes off after a short time to conserve energy.
Press any button on the headphones to display the current
setting of the Bluetooth function.
To disconnect the Bluetooth connection to the audio source, you can
switch off the headphones or the Bluetooth function. This setting is
retained until the Bluetooth function is switched on again.
To switch the headphones off:
Press the Master button
flashes 3 times red.
You hear a descending beep. The Bluetooth connection is automatically
deactivated. The headphones switch off.
To switch the Bluetooth function off:
Press the Bluetooth button
flashes 3 times red. You hear a descending beep.
²
The Bluetooth button
off.
Putting the PXC 360 BT into operation
²
is backlit, indicating the current setting.
and keep it pressed until the
²
and keep it pressed until the
goes off. The Bluetooth function is switched
LED
LED
15