Related Manuals for Sennheiser 500643
Summary of Contents for Sennheiser 500643
- Page 1 PXC 450 Bedienungsanleitung Instruction Manual Notice d‘emploi Istruzioni per l‘uso Instrucciones de uso Gebruiksaanwijzing...
-
Page 2: Table Of Contents
This Sennheiser product will serve you many years with reliability and simple operation. Your guarantee is the good name of Sennheiser and the competence it has gained in over 60 years of manufacturing high-quality electroacoustic products. Please take a few minutes to read this manual. We wish to help you enjoy this... -
Page 3: Safety Instructions
Remove the batteries if the headphones will not be used for longer periods. Protect your hearing Sennheiser headphones also sound very good at low volumes. Appropriate use of the headphones Appropriate use of the headphones includes: that you have read these instructions, especially the “Safety instructions“... - Page 4 Safety instructions for battery and rechargeable battery use Batteries/rechargeable batteries can leak with abuse or improper use. In extreme cases, there is the risk of explosion or fire. Sennheiser therefore assumes no liability in cases of abuse or improper use.
-
Page 5: Included With Delivery
Included with delivery The following are delivered with the PXC 450: 1 PXC 450 headphones 1 Soft case 1 Audio adapter (6.3-mm stereo plug) 1 Inflight adapter (2 x 3.5-mm mono plug) 2 Micro batteries (AAA) 1 Operating instructions PXC 450 Headphones... - Page 6 Ideal for traveling: comfortable, sturdy and folding design with one-sided cable connection Perfectly suited for use in inflight entertainment systems as well as mobile music sources Headphones can also be used without cable to dampen noise...
-
Page 7: Control Elements
Control elements Headband Normal/bypass sliding switch Connection for audio cable Audio cable ON/OFF button Signal from LED display Meaning NoiseGard 2.0 is switched on (see page 11) green TalkThrough is switch on (see page 12) flashing Batteries or rechargeable batteries almost empty (see page 7) »... -
Page 8: Commissioning
(see ”Switching NoiseGard on and off“ on page 11). – Remove the battery from battery compartment , if you will not use the headphones for an extended period. If the battery capacity is almost depleted, the LED flashes. -
Page 9: Adjusting Headband
If the plug on the audio cable does not fit: Use the adapter for 6.3-mm plug bushing illustration to the left). If you wish to use the headphones for the inflight entertainment in an airplane: Use the inflight adapter left). -
Page 10: Daily Use
People like to listen more loudly with headphones than with speakers. Loud volumes for extended periods of time can lead to permanent hearing loss. Protect your hearing! Sennheiser head- phones also sound very good at low volumes. Use the VOLUME +... -
Page 11: Operation Without A Battery
Operation without a battery The PXC 450 can also be used like conventional headphones without batteries. This is appropriate if you do not have batteries, or if the battery is empty. To listen without batteries: Fold the left headphone cup as inward as possible, as indicated. -
Page 12: Switching Noisegard On And Off
To switch off NoiseGard 2.0: Press the ON/OFF button The LED goes out. If NoiseGard is switched off, you can use the PXC 450 like typical headphones to listen to music. Note: – Compared to the other buttons of the controller, ON/OFF button avoid accidental switching off. -
Page 13: Switching Talkthrough Function On And Off
The PXC 450 provides excellent damping of ambient noises. However, to enable you to be able to communicate with your environment unhindered while wearing the headphones, the PXC 450 has a TalkThrough function. The following prerequisites must be fulfilled for the... -
Page 14: Removing And Connecting Audio Cable
Removing and connecting audio cable To use the headphones strictly to dampen noise, you can remove the audio cable (see illustration). To remove the audio cable: Pull the plug of the audio cable connection To reconnect the audio cable: Plug the plug of the audio cable connection »... -
Page 15: Transporting Headphones
Turn the ear cups 90°. Pull out the right side of the headband, and then fold inwards. Place the headphones flat into the soft case, as illustrated. The edge of the soft case has loops for storing up to two micro batteries (AAA) You can transport the accessories in the lid of the bag: –... -
Page 16: Accessories And Replacement Parts
Fluids can penetrate the housing of the device and cause a short-circuit of the electronics. Clean the headphones occasionally using a soft, slightly damp cloth. Replacing the ear cushions You can replace the ear cushions. You can obtain replacement ear cushions as accessories. -
Page 17: Technical Data
Converter principle Coupling to the ear Transmission range Rated impedance active/ passive Sound pressure levels at 1 kHz and 1 volt Harmonic distortion at 1 kHz Cable plug Inflight adapter Audio adapter Cable length Weight without cable and battery Voltage battery/ rechargeable battery (Micro/AAA) Passive sound insulation... -
Page 18: Manufacturer Declaration
Please retain receipt as proof of purchase. Without this proof, which the Sennheiser service partner will check, you will ge- nerally need to pay for repairs performed. The sales receipt must in- clude the date of purchase and the description of the product. - Page 19 Sennheiser product as the end customer. The regula- tions of the UN purchasing law have no relevance. In cases of warrantee, send the device, including accessories and sa- les receipt to the service partner responsible for you. A current overview of all world-wide service partners for Sennheiser electronic GmbH &...
- Page 20 Sennheiser electronic GmbH & Co. KG 30900 Wedemark, Germany Phone +49 (5130) 600 0 Fax +49 (5130) 600 300 www.sennheiser.com Printed in China Publ. 08/07 517600/A02...