Connecting The Pxc 360 Bt Using The Audio Cable - Sennheiser PX 360 BT Instruction Manual

Putting the PXC 360 BT into operation
1
1
16

Connecting the PXC 360 BT using the audio cable

Connecting the audio cable
You can connect the headphones to the audio source using the audio cable
if:
• you do not want to use the Bluetooth function,
• you are not allowed to use the Bluetooth function (some airlines do not
allow Bluetooth transmission)
or
• the battery pack is flat.
When the audio cable is connected to the headphones, the
Bluetooth function cannot be switched on.
If the headphones are already connected to the audio source via the
Bluetooth interface, the Bluetooth connection is automatically discon-
nected when you connect the audio cable. The
red and you hear a descending beep.
Connect the 2.5 mm jack plug of the audio cable to the socket
headphones.
Connect the 3.5 mm jack plug of the audio cable
– the headphone socket of your audio source or
Music
Photos
Videos
Extras
Settings
Shuffle Songs
– the audio adapter for ¼" (6.35 mm) jack socket
plug of the audio cable is too small
– the in-flight adapter
in-flight entertainment system.
When the audio cable is connected to your audio source, you hear the
sound from your audio source and the
Detaching the audio cable
If you want to use the PXC 360 BT as Bluetooth headphones only, you can
detach the audio cable
Pull the 2.5 mm jack plug of the audio cable
the headphones.
When detaching the audio cable, the Bluetooth function is not
automatically switched on.
Switch the Bluetooth function on again (see "Switching the
Bluetooth function on/off" on page 18).
LED
if you want to use the headphones with an
LED flashes blue.
.
from the socket
flashes 3 times
´
of the
to
if the 3.5 mm jack
´
of