Putting The Pxc 360 Bt Into Operation; Charging The Battery Pack - Sennheiser PX 360 BT Instruction Manual

3h
¸
1
3s

Putting the PXC 360 BT into operation

Before using the PXC 360 BT for the first time, remove the protection
strip from the battery pack.

Charging the battery pack

Before using the battery pack for the first time, charge it for at least
3 hours. The battery pack can also be charged inside the headphones
during operation.
When charging the battery pack, the LED
red. When the battery pack is fully charged, the LED
lights up green.
When the battery pack is almost flat, the
short, descending acknowledgement tone.
The operating time of the battery pack depends on the device settings, the
listening situation and the audio sources used. The operating time will be
reduced if you use SRS WOW HD.
Type of use
NoiseGard and Bluetooth technology
NoiseGard without Bluetooth technology
Bluetooth technology without NoiseGard
Remove the battery pack if the headphones will not be used for
extended periods of time.
Putting the PXC 360 BT into operation
¸
on the battery pack lights up
¸
on the battery pack
LED flashes red. You hear a
Operating time
8 hours
20 hours
10 hours
9