Changing The Volume - Sennheiser PX 360 BT Instruction Manual

Using the PXC 360 BT
²
18
Switching the TalkThrough function on/off
The PXC 360 BT provide excellent attenuation of ambient noise. The Talk-
Through function allows you to communicate undisturbed with other
people without having to remove the headphones even when NoiseGard is
switched on.
To switch the TalkThrough function on:
Briefly press the NoiseGard
The LED lights up red. The TalkThrough function is switched on.
To switch the TalkThrough function off:
Briefly press the NoiseGard
The LED goes off. The TalkThrough function is switched off.
When the TalkThrough function is switched on, you cannot listen to
music.
Switching the Bluetooth function on/off
Via the Bluetooth interface, the headphones can be connected to a wide
variety of Bluetooth enabled devices.
To switch the Bluetooth function on:
Press the Bluetooth button
flashes 3 times blue. The Bluetooth function is switched on.
To switch the Bluetooth function off:
Press the Bluetooth button
flashes 3 times red. You hear a descending beep.
²
The Bluetooth button
Bluetooth function is switched off.

Changing the volume

The PXC 360 BT allow you to change the volume of the audio signal:
Button Duration Function
Incrementally
increases the
volume
Continuously
increases the
1 s
volume
If you press the respective button briefly, the volume is changed incremen-
tally; if you hold down the button, the volume is changed continuously.
When the minimum or maximum volume is reached, you hear an acknowl-
edgement tone.
button ».
button ».
²
and keep it pressed until the
²
and keep it pressed until the
goes off. The LED flashes blue and the
Button Duration Function
1 s
LED
LED
Incremen-
tally reduces
the volume
Continuously
reduces the
volume