Changing The Volume - Sennheiser PXC 310 BT Quick Manual

Using the PXC 310 BT
18
Switching the Bluetooth function on/off
Via the Bluetooth interface, the headphones can be connected to a wide
variety of Bluetooth enabled devices.
To switch the Bluetooth function on:
Press the Bluetooth button
flashes 3 times blue. The Bluetooth function is switched on.
To switch the Bluetooth function off:
Press the Bluetooth button
flashes 3 times red. You hear a descending beep.
´
The Bluetooth button goes off. The
Bluetooth function is switched off.

Changing the volume

The headphones allow you to change the volume of the audio signal or the
volume of the TalkThrough function:
Button Duration Function
Incrementally
increases the
volume
Continuously
increases the
1 s
volume
If you press the respective button briefly, the volume is changed
incrementally; if you hold down the button, the volume is changed
continuously.
When the minimum or maximum volume is reached, you hear an
acknowledgement tone.
´
and keep it pressed until the
´
and keep it pressed until the
Star LED flashes blue and the
Button Duration Function
Incrementally
reduces the
volume
Continuously
reduces the
1 s
volume
Star LED
Star LED