Connecting The Mm 550-X Using The Audio Cable - Sennheiser MM 550-X Instruction Manual

Putting the MM 550-X into operation
1
1
14 | MM 550-X

Connecting the MM 550-X using the audio cable

Connecting the audio cable
You can connect the headset to the audio source using the audio cable if:
• you do not want to use the Bluetooth function,
• you are not allowed to use the Bluetooth function (some airlines do not
allow Bluetooth transmission)
or
• the battery pack is flat.
When the audio cable is connected to the headset, the Bluetooth
function cannot be switched on.
If the headset is already connected to the audio source via the Bluetooth
interface, the Bluetooth connection is automatically disconnected when
you connect the audio cable. The
hear a descending beep.
Connect the 2.5 mm jack plug of the audio cable to the socket
headset.
Connect the 3.5 mm jack plug of the audio cable
– the headphone socket of your audio source or
Music
Photos
Videos
Extras
Settings
Shuffle Songs
– the audio adapter for ¼" (6.35 mm) jack socket
plug of the audio cable is too small or
– the in-flight adapter
in-flight entertainment system.
When the audio cable is connected to your audio source, you hear the
sound from your audio source and the
Detaching the audio cable
If you only want to use the MM 550-X as a Bluetooth headset, you can
detach the audio cable
Pull the 2.5 mm jack plug of the audio cable
the headset.
When detaching the audio cable, the Bluetooth function is not automati-
cally switched on.
Switch the Bluetooth function on again (see "Switching the Bluetooth
function on/off" on page 17).
1
LED flashes 3 times red and you
if you want to use the headset with an
1
LED flashes blue.
.
from the socket
´
of the
to
if the 3.5 mm jack
´
of