MQ Power WHISPERWATT DCA10SPX4 Operation Manual page 19

5. Engine Speed Switch — Controls the speed of the
engine (low or high).
6. Hour Meter — Indicates the amount of time the
generator has been in use.
7. Ignition/Starter Switch — Four-position switch: Stop,
Run, Preheat, and Start. Insert the ignition key to start
and stop engine.
8. Voltage Regulator Control Knob — Allows manual
adjustment of the generator's output voltage.
9. Circuit Breaker — Two-pole, 50-amp breaker protects
the CS6369 receptacle.
10. Circuit Breaker — Two-pole, 30-amp breaker protects
the L6-30R receptacle.
11. Circuit Breaker — Single-pole, 30-amp breaker
protects the L5-30R receptacle.
12. Circuit Breaker — Single-pole, 20-amp breaker
protects the GFCI receptacle.
13. Main Circuit Breaker — Three-pole, 45-amp main
circuit breaker connects or disconnects the generator
output from the output receptacles and protects the
generator from short circuits or overcurrent.
DCA10SPX4/DCA10SPXU4 • OPERATION MANUAL — REV. #2 (10/11/22) — PAGE 19
CONTROL AND OPERATION PANEL