Print from PC > Printing Data Saved in the Printer
Printing Document from Quick Copy Box
Quick Copy feature facilitates additional prints of a document already printed. Activating Quick Copy and printing
a document using the printer driver allow the print data to be stored in the Quick Copy Job Box. When additional
copies are required, you can reprint the required number of copies from the operation panel. By default, up to 32
documents can be stored. When power is turned off, all stored jobs will be deleted.
NOTE
• When the number of jobs reaches the limit, the oldest job will be overwritten by the new one.
• To maintain free space on the hard disk, you can set the maximum number of stored jobs.
➡
Configure the Job Box (page 136)
1
Display the screen.
1
[Document Box] key > [
NOTE
If the box initial screen is set to the Custom Box, display the Job Box screen.
[Document Box] key > [Back] key > [
2
Select the creator of the document, and select the [OK] key.
2
Print the document.
1
Select the document to print and the [OK] key
Select a document and a checkmark will appear on the right side of the selected document.
If you select [All Files], all documents will be marked with a checkmark on their right side.
When all documents are checked, all check marks are removed.
If you select a document marked with a checkmark and once again select [Select], the selection will be
cleared.
2
[
][
] key > [Print] > [OK] key
3
Enter the number of copies to print and the [OK] key
Printing starts.
][
] key > [Quick/Proof] > [OK] key
][
] key > [Job Box] > [OK] key
128