Kyocera ECOSYS PA4500cx Operation Manual page 340

Troubleshooting > Troubleshooting
IMPORTANT
Before performing color registration, be sure to perform Color Adjustment. If color drift remains, perform color
registration. By performing color registration without performing Color Adjustment, the color drift will be resolved
once, however, it may cause the serious color drift later.
See the table below regarding Color Adjustment.
➡
Color Adjustment (page 357)
1
Load paper.
IMPORTANT
• Load the paper with the print side facing up.
• After removing new paper from its packaging, fan out the paper before loading it in the cassettes.
➡
Precaution for Loading Paper (page 90)
• Before loading the paper, be sure that it is not curled or folded. Paper that is curled or folded may cause
paper jams.
• Ensure that the loaded paper does not exceed the level indicator (see illustration above).
• If paper is loaded without adjusting the paper length guide and paper width guide, the paper may skew
or become jammed.
2
Display the screen.
[Menu] key > [
[ ][ ] key > [Normal] > [OK] key
3
Print the chart.
[ ][ ] key > [Print Chart] > [OK] key > [Yes]
A chart is printed. Three types of charts are printed on a single sheet of paper for the three colors M
(Magenta), C (Cyan), and Y (Yellow): H-L (Left), V (Center), and H-R (Right).
After printing, return to the Color Printing Position Correction Standard menu.
][ ] key > [Adjust/Maint.] > [OK] key > [ ][ ] key > [Color Regist.] > [OK] key >
333